「衡水快速门」涡轮硬质快速门安装预留空间说明
 

Explanation of Reserved Space for Installation of Turbine Hard Fast Gate of Hengshui Express Gate
 

涡轮硬质快速门安装前需要确认的现场情况：


Site conditions that need to be confirmed before installation of Turbo rigid express doors:
 

一、涡轮硬质门，门头预留空间：


1. Turbine hard door with reserved space at the door head:

 

1、2.8米如下的，上面留位置，「保定快速门」，大于850mm。


1, 2.8 meters below, the upper position, Baoding Fast Gate, greater than 850 mm.


2、3.8米如下的，上面留位置，大于900mm。


2, 3.8 meters below, above the left position, greater than 900 mm.


3、5.0米如下的，上面留位置，「邢台快速门」，大于1000mm。


If it is less than 3 and 5.0 meters, it will be left on the top. The Xingtai Express Gate is larger than 1000 mm.


4、6.2米如下的，上面留位置，大于1250mm。


4, 6.2 meters below, above the left position, greater than 1250 mm.


（防爆电机的，另外算。）


(For explosion-proof motors, count separately.)

二、涡轮硬质门，导轨预留位置：


二. Turbine rigid door, guide rail reserved position:


1、导轨一侧，预留位置，大于350mm。


1. On one side of the guide rail, the reserved position is larger than 350 mm.


2、导轨+电机包厢一侧，预留位置，大于500mm。


2. On the side of guide rail + motor compartment, the reserved position is more than 500 mm.

 

（超高的门，防爆电机的；另外算。）

 

(Super high door, explosion-proof motor; another calculation.)

 

三、现场地面和墙面，「承德快速门」，「衡水快速门」，需要可以支撑门。


3. The ground and wall of the site, "Chengde Express Gate" and "Hengshui Express Gate" need to be able to support the door.



衡水快速门」涡轮硬质快速门安装预留空间说明


Explanation of Reserved Space for Installation of Turbine Hard Fast Gate of Hengshui Express Gate